About this opportunity
Cooling Towers LLC lists this Cooling Tower Carpenter opportunity in pasadena, Texas. Review the employer’s description below for duties, qualifications and application requirements.
Job description
Overview
As a carpenter you are the main force behind Cooling Towers LLC. Cooling Towers LLC will provide you with the tools and training needed to perform your job safely and efficiently. You will be expected to know and follow all facility and company safety policies. Cooling Towers LLC prides itself in our safety record. We will expect you to have the same pride and commitment in safety. As a carpenter you will report directly to your foreman or your foreman's appointed leadman. You will need to be able to follow directions and be expected to ask questions as they arise. You will want to follow the chain of command when questions or concerns arise. However, if you cannot get the help need you can always go to the superintendent. You will be assigned multiple tasks throughout the day. It is important to have pride in your work and not to take short cuts or rush. You will need to be a good multitasker and be able to retain instructions. You will always also be expected to be professional when on the job site and maintain a professional appearance. You will also be expected to supply your own hand tools; a tool list is included for review. Cooling Towers LLC believes in promoting within. Spend the time to train with your foreman and leadman to advance. This will create a strong and motivated crew. With this attitude and work ethic you will advance in no time.
Responsibility List
Come prepared to work everyday
Know all the safety rules and policies (if you have questions ask)
Follow permit requirements
Follow LOTO requirements
Follow confined space requirements
Follow instructions given by your supervisor, foreman, or leadman
Use stop work authority if asked to do something you are not comfortable with or it feels wrong
Eliminate or identify safety hazards as you see them (you see it you own it)
Ask Questions
Stay on task and productive
Report when inventory is low to your foreman or leadman
Inspect tools and safety equipment
Communicate issues with the foreman or leadman
Have a clear understanding of the job task you are assigned to
Work at heights
Work in confined spaces
Act Professionally
Dress professionally
Report incidents to your foreman
Have all the tools on the tool list
Keep work area clean
Clean up work area after completion
Perform each job task with safety, quality, and efficiency (in that order)
Carpenter's Job Skills
Below is a list of job skills you will need to master before being classified as a Carpenter.
1) Fabrication
2) Canvas Bag Use
3) Fixed Ladder Use
4) Employee Fit for Work
5) 3 & 5 Point Tie Off
6) Temporary Plywood Cold Water Basin Cover
7) Structural Inspection
8) Mechanical Inspection
9) Lifeline Installation & Use
10) Tool Inspection & Use
11) Fill Installation
a) Splash Fill
b) Pack Fill
c) XF Fill
12) Drift Eliminators Installation
a) Cross Flow
b) Counter Flow
13) Structure
14) Louvers
15) Stairways
16) Ladders
17) Fan Deck
18) Handrails
19) Fan Stack
20) Distribution Systems
a) Header
b) Valves
c) Lateral Lines
d) Nozzles
e) Distribution Boxes
21) Hot Water / Cold Water Basins
22) Cutting Fan Deck Radius & Installing Bridging
Tool List
- Toolbox with Locks
- Large Tool Bag
- 22-28 oz hammer (Smooth Head)
- Long Nail Puller (14 18)
- Drift Pin (rolling head alignment bar)
- Speed square
- 30 tape measure
- Hand saw
- Chalk line
- 1 level
- Small crescent wrench
- Drive ratchet
- 3/4 Deep socket
- 9/16 Deep socket
- 3/4 Combo wrench
- 9/16 Combo wrench
- Wire Snips
- Pencils
- Markers
- Retractable raiser knife
Worksite address
pasadena, TX, 77505, US
Who can apply
Review the original listing for work authorization, qualifications and employer requirements.