About this opportunity
Metrea lists this Principal RF Engineer opportunity in town of victor, New York. Review the employer’s description below for duties, qualifications and application requirements.
Job description
Company Overview
Metrea delivers effects-as-a-service to national security partners across five domains and more than a dozen mission areas. These include airborne ISR, electronic warfare, secure communications, aerial refueling, special air missions, aerial firefighting, and advanced simulation. We own the whole stack: designing, building, and operating turnkey capabilities that give our partners decisive, asymmetric advantage against rapidly evolving threats.
Group Overview
Electromagnetic and Cyber Group (EM&C)is responsible fordeveloping flexible and survivable advanced electronic warfare and secure communications equipment while providing the industry’s leading signals intelligence, electronic warfare, and cyber experts.Metreaspecializes in signal classification, direction finding, advanced geolocation techniques, and waveform development including waveforms for MANET and LPI/LPD applications.Metreaalso develops special purpose radios for government customers andlicensesDF and geolocation solutions to multiple OEMs. Within EM&C, RADLAB is our radar capability area. RADLAB is a small team building novel capabilities from the ground up, taking ideas from physics and math through simulation, prototype, and test.
Position Summary
RADLAB is looking for a Principal RF Engineer to own the RF front-end design for our advanced integrated sensing-and-communications (ISAC) design, test and evaluation (DT&E) platform. You will be responsible for the signal chain from the antenna element port inward through the analog-digital interface, complementing our principal antenna engineer who owns the radiating elements and array design. Together, you will define and maintain a clean interface between the antenna and RF front-end domains.
This is a hands-on individual-contributor role with significant technical leadership responsibility. You will translate system-level requirements into producible RF hardware, starting from trade studies through schematic capture, simulation, PCB layout, fabrication oversight, and bench validation. You will work directly with our prototype engineer to bring up and characterize hardware. The DT&E platform requires RF front-ends spanning C-band, Ka-band, and millimeter-wave frequencies, so the ability to work across frequency regimes is essential.
What You'll Do
Own the RF front-end architecture for the DT&E platform: signal chain topology, component selection, and interface definitions
Design modular and testable receive and transmit signal chains: LNAs, PAs, TR switching, filtering, frequency conversion, and frequency synthesis, owning the cascade analysis, noise figure budget, linearity allocation, spurious plan, and power dissipation budget
Develop frequency synthesis and LO distribution architectures that maintain phase coherence across multi-element systems, owning the trade-offs between integration, phase noise, spurious performance, and layout complexity
Coordinate with the principal antenna engineer at the element-port boundary: translate scan impedance data into matching network designs, feed back PA load-pull requirements, and ensure front-end packaging is compatible with element spacing and thermal constraints
Own the RF PCB design intent end-to-end: stack-up definition, material selection, impedance requirements, RF/EM co-simulation, and shielding strategy. Perform layout directly or drive external layout vendors with clear constraints and review their work for RF correctness. Generate manufacturing packages and resolve DFM issues through fabrication and assembly
Work directly with other engineers to bring up, calibrate, and characterize RF front-end hardware. Diagnose and resolve issues from bench measurements through system-level integration
Design and adapt RF front-ends across C-band, Ka-band, and millimeter-wave, addressing the packaging, thermal, and loss challenges specific to each regime
Specify and integrate RF components with digital subsystems. Collaborate with FPGA and DSP engineers on the analog-digital interface: clocking, data formats, signal conditioning, and the analog/digital boundary
Define RF test and calibration procedures for front-end and system-level performance verification
Lead design reviews, establish RF design standards and documentation practices within RADLAB, and mentor junior engineers
Contribute to proposals and technical white papers with RF feasibility assessments and architecture concepts
What You Bring
BS, MS or PhD in Electrical Engineering, RF/Microwave Engineering, or a closely related field
10+ years of professional experience designing performance-critical RF hardware in a radar, EW, communications, or similar system context. Equivalent depth through other kinds of applied RF engineering will also be considered
Demonstrated experience owning RF subsystems end-to-end: from architecture and trade studies through schematic capture, simulation, PCB layout, fabrication, bring-up, and test
Expert-level proficiency in RF cascade analysis, link budget development, noise figure budgeting, and transceiver system design
Strong hands‑on experience with RF circuit simulation (ADS, MWO, MATLAB, or equivalent) tools
Proficiency in RF/microwave PCB design: impedance-controlled routing, high-frequency material selection and characterization, multi-layer stack-up design, and EM co-simulation
Experience with schematic capture and layout tools (Altium, OrCAD, DxDesigner, or equivalent)
Deep familiarity with RF test and measurement equipment: VNA, spectrum analyzers, signal generators, oscilloscopes, noise figure meters
Clear technical writing and the ability to communicate design decisions, performance trade-offs, and test results to both RF and non-RF engineers
Preferred Qualifications
Direct experience designing TR modules or multi‑channel RF front‑end hardware for active arrays
Experience across multiple frequency regimes (C‑band through Ka‑band or mmWave), including the packaging, interconnect, and thermal management challenges that change as you move up in frequency
Experience with EM simulation tools (HFSS, CST, or equivalent)
Experience integrating RF front‑ends with high‑speed digital backends: ADC/DAC interfaces, JESD204B/C, FPGA‑based DDS, clocking architectures
Familiarity with ISAC, joint radar‑communications, or cognitive/adaptive waveform concepts
Publications or patents in relevant RF, antenna, radar, or EW domains
An MS or PhD with research in a hardware‑intensive RF domain
Benefits
Comprehensive medical plan options
HSA/FSA accounts
Dental and vision coverage
6% employer 401(k) match
Fully paid parental leave for all new parents
Generous PTO
Life and disability insurance
Long‑term and Short‑term disability coverage
AD&D Coverage
Pet Insurance
Employee Assistance Program
Subsided gym membership / plans throughWellhub
Work Authorization / Security Clearance
Applicants must be legally authorized to work in the United States
Must be a U.S. citizen
This position requires the ability to obtain and hold an active, verified, and in good standing U.S. Government security clearance at the Top Secret level. Candidates will be subject to a background investigation in accordance with federal requirements.
AAP/EEO Statement
Metrea Advanced Signals LLC is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.
Position Type and Expected Hours of Work
This is a full‑time exempt position with typical working hours of Monday through Friday inside of standard business hours. Hours and work shifts may change in accordance with department and business needs. Exempt Employees must have the ability to be on‑call and available, as business needs require.
Work Environment
Office and Lab
Travel
5%
Base Pay Range
The compensation range shown below is a good faith estimate and reflects the expected base pay for this position upon hire. This is just one component of Metrea's overall approach to total rewards and final compensation decisions, including the ultimate salary or hourly rate agreed upon, may vary depending on factors such as job location, job‑specific knowledge, skills, experience, and the overall negotiated compensation package. Eligible full‑time employees also receive a comprehensive benefits package designed to support their health, wellbeing, and long‑term success.
Pay Range: $175,000 USD - $200,000 USD
Our Firmware
At Metrea, our single core value is Rooted in Humility, and our four cornerstone attributes are Entrepreneurial, Systematic, Discerning, and Over‑Deliver. These form what we call our Teammate Firmware. Just like technical firmware connects software and hardware, our Firmware is the constant interface between our mission and our people. It defines how we show up, how we work together, and how we solve complex problems.
Our team Firmware creates a web‑like, hyper‑collaborative, dynamically hierarchical way of working that helps us adapt quickly, communicate openly, and distribute decision‑making to where expertise actually lives. It enables groups to self‑organize around hard problems, shift fluidly as priorities evolve, and operate with the trust, curiosity, and discipline required in a complex mission space. This foundation allows us to deliver elegant, effective solutions and uphold our purpose: protecting our precious inheritance.
#J-18808-Ljbffr
Who can apply
Review the original listing for work authorization, qualifications and employer requirements.