About this opportunity
G&W Electric Co lists this Quality Weld Inspector (5:00am to 1:30pm) 1st Shift opportunity in bolingbrook, Illinois. Review the employer’s description below for duties, qualifications and application requirements.
Job description
Quality Weld Inspector (5:00am to 1:30pm) 1st Shift
We are looking to hire an enthusiastic and hardworking quality weld inspector with a good eye for detail and knowledge of weld materials, processes, technique, and overall weld integrity and quality.
The Quality Inspector – Weld & Fabrication ensures welded and fabricated products meet engineering drawings, welding requirements, customer specifications, and quality standards. This role works primarily on the manufacturing floor, inspecting parts at key stages of production to identify and contain quality issues early. The inspector works closely with Welders, Team Leaders, Supervisors, Welding Engineering, Manufacturing Engineering, and Quality Engineering to build quality into the process and prevent defects from moving downstream.
Essential Duties and Responsibilities
In-Process and Floor Inspection
Perform pre-weld, in-process, and final inspections according to drawings, specifications, inspection plans, and procedures.
Verify products meet requirements before they move to the next operation.
Identify quality issues and process deviations early to reduce rework, scrap, and production delays.
Provide immediate feedback to Welders, Team Leaders, and Supervisors when problems are found.
Verify all required inspections and quality checkpoints are completed.
Pre-Weld and Fit-Up Inspection
Verify materials, components, and configurations against drawings, BOMs, and specifications.
Inspect joint prep, fit-up, alignment, gaps, dimensions, cleanliness, and overall readiness for welding.
Verify weld locations, weld sizes, and welding symbols against engineering drawings.
Confirm the correct Welding Procedure Specification (WPS) is available and being followed.
Identify and contain nonconforming conditions before welding begins whenever possible.
Weld Inspection
Perform visual inspections of welded assemblies for compliance with drawings, WPS requirements, workmanship standards, and applicable welding codes.
Inspect weld size, length, location, profile, continuity, and overall workmanship.
Identify weld defects such as cracks, porosity, undercut, overlap, incomplete welds, arc strikes, excessive reinforcement, and other unacceptable conditions.
Inspect repaired or reworked welds before product release using appropriate weld gauges and measurement equipment.
Support additional NDT activities when required and properly qualified.
Dimensional Inspection
Inspect fabricated parts and welded assemblies against engineering drawings and specifications.
Verify critical dimensions, tolerances, alignment, squareness, flatness, hole locations, and other required characteristics.
Use calibrated inspection equipment such as calipers, micrometers, weld gauges, squares, tape measures, fixtures, and other measuring devices.
Perform dimensional inspections throughout the manufacturing process to identify problems before fabrication is complete.
Final Inspection and Product Release
Perform final visual and dimensional inspections of completed products.
Verify all required manufacturing and inspection steps have been completed.
Confirm all nonconformances and rework have been properly addressed.
Complete inspection records and quality documentation accurately and on time.
Nonconformance and Containment
Identify, document, tag, and segregate nonconforming material and products according to company procedures.
Initiate or support NCR/NCMR documentation as required.
Prevent nonconforming products from moving to the next operation without review and disposition.
Verify rework and repairs are completed correctly.
Support immediate containment when quality issues are identified.
Problem Solving and Continuous Improvement
Support root-cause investigations and corrective actions related to welding and fabrication defects.
Identify recurring quality problems and communicate trends to Production and Quality leadership.
Work with Production, Welding Engineering, Manufacturing Engineering, and Quality Engineering to eliminate recurring defects.
Participate in improvement efforts to reduce defects, rework, scrap, and downstream quality escapes.
Help verify corrective actions and process improvements on the manufacturing floor.
Quality System and Documentation
Maintain accurate inspection records and product traceability.
Follow Quality Plans, Control Plans, inspection procedures, work instructions, and mfg. standards.
Verify inspection equipment is calibrated and within its calibration period before use.
Report damaged, inaccurate, or out-of-calibration equipment.
Support internal and external quality audits as needed.
Keep quality records organized and accurate.
Education and Experience: Minimum
High school diploma or GED required; technical or manufacturing education preferred.
Previous quality inspection experience in welding, metal fabrication, machining, or manufacturing.
Ability to read and understand engineering drawings, tolerances, and welding symbols.
Working knowledge of welding and fabrication processes.
Ability to understand and follow Welding Procedure Specifications (WPS).
Experience using dimensional and weld inspection equipment.
Ability to accurately document inspection results and nonconformances.
Strong attention to detail and ability to identify quality and workmanship issues.
Strong communication skills with production employees, Team Leads, Supervisors, Engineers, & Quality.
Education and Experience: Preferred
Experience inspecting MIG, TIG and other welding processes.
Knowledge of applicable AWS and/or ASME welding requirements.
AWS Certified Welding Inspector (CWI) certification or equivalent welding inspection training.
Experience with Visual Testing (VT) and other NDT methods such as Penetrant Testing (PT), Magnetic Particle Testing (MT), or Ultrasonic Testing (UT).
Experience with NCR/NCMR systems, root-cause analysis, corrective actions, and continuous improvement.
Experience with Lean Manufacturing or World-Class Manufacturing practices.
Excellent verbal and written communication skills
Analytical abilities with good attention to detail
Proficiency in Microsoft Word and Excel
What we offer you:
Pay Range is typically between $28.50 - $30.25 per hour.
Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications.
G&W Electric offers a comprehensive benefits package that includes:
Medical, Dental and Vision Insurance
Short and Long-Term Disability
Life Insurance
Health club membership program and reimbursement
Employee Assistance Program
Tuition Reimbursement
401 (k)
Annual Profit Sharing
Vacation
Air-conditioned/heated state-of-the-art manufacturing facility
About G&W Electric
Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive.
G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world!
G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires.
*G&W Electric participates in the E-Verify process for all new hires.
#J-18808-Ljbffr
Worksite address
bolingbrook, IL, 60440, US
Who can apply
Review the original listing for work authorization, qualifications and employer requirements.