About this opportunity
K2 Space lists this Senior Fluids Manufacturing Engineer opportunity in los angeles, California. Review the employer’s description below for duties, qualifications and application requirements.
Job description
K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space.
The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits.
With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company.
The Role
You will spearhead the clean-sheet manufacturing effort for creating K2 Space’s first Pumped Fluid Loop (PFL), a system integral for unlocking the ability to fly the highest-powered payloads ever put into space. Partnering with design engineers, you will ensure manufacturability of designs, build the first prototype, design the build flow and tooling, and finalize the process for transitioning components and assemblies from design to rate production. You will lead the setup of the work center for fluid components creation, assembly, and test. In your first year you will iterate upon the design, tooling, and station, transitioning them to production.
Responsibilities
Stand up the work center to manufacture and assembleourfirst Pumped Fluid Loop
LeadDFMefforts with design engineeringteams, influencing architecture decisionstooptimizefor cost, quality,scalabilityand integration risk
Developmanufacturingplanning and build flows for thesatellite’s fluid systems
Develop and deploy advanced manufacturing technologies, automation concepts, and tooling systems to support increasing production rate
Collaborate withEngineers andTechnicians to disposition nonconformances and evaluateany correctiveactions
Actasthemanufacturingpoint of contact forsystemfill,proof,and leak
Develop capacity models and rate ramp strategies to supportrapidprogram growth
Qualifications
Bachelor’s degree in electrical, aerospace, mechanical, computer, or other engineering discipline
5+ years of experience inamanufacturingengineering role
Experience creating, improving, anddeletingproduction process and workflows
Experience interacting with CAD software and CAD models
Experience qualifying (vibrationaland thermal testing)components and assemblies
Demonstrated knowledge of leak testing methods
Experience working in a clean room and with ESD-sensitive equipment
Experience creating GSE, tooling, orfixturesto supportmanufacturingoperations
Nice to Have
Experience or exposure in a test or automation role
Proficient in Python and/or Rust
Experiencewithfluidcomponentfunctionaltesting (pumps,accumulators)
Excellent interpersonal and negotiation skills
Expert multitasking skills with the ability to juggle priorities whilemaintainingfocus to deliver against program goals
Compensation and Benefits
Base salary range for this role is $140,000 - $175,000 + equity in the company
Salary will be based on several factors including, but not limitedto:knowledge and skills, education, and experience level
Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many otherperks
If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know.
Export Compliance
As defined in the ITAR, “U.S. Persons” include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a “U.S. Person.”
The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a “U.S. person” as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license.
K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Voluntary Self-Identification
For government reporting purposes, we ask candidates to respond to the below self-identification survey.Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.
As set forth in K2 Space ’s Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.
If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection.As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows:
A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.
A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Why are you being asked to complete this form?
We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.
Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at .
How do you know if you have a disability?
A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:
Alcohol or other substance use disorder (not currently using drugs illegally)
Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
Blind or low vision
Cancer (past or present)
Cardiovascular or heart disease
Celiac disease
Cerebral palsy
Deaf or serious difficulty hearing
Diabetes
Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
Epilepsy or other seizure disorder
Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
Intellectual or developmental disability
Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
Missing limbs or partially missing limbs
Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
Partial or complete paralysis (any cause)
Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
Short stature (dwarfism)
Traumatic brain injury
PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.
#J-18808-Ljbffr
Worksite address
los angeles, CA, 90079, US
Who can apply
Review the original listing for work authorization, qualifications and employer requirements.